642-067 Exam

EXAM 642-067
Advanced Routing and Switching for Field Engineers
Total Questions: 12
 
Question: 1
As a Network Engineer in an international corporation, you are familiar with the Cisco products, services and solutions. Which of the following statement describes one of the characteristics of the Cisco Validated Design (CVD) architectural selling approach?
A. This approach does not support verticalization although it is aligned to partner programs.
B. This approach integrates solutions by combining technologies that are aligned to customer buying patterns.
C. This approach is not aligned to partner programs although it supports verticalization.
D. This approach separates technologies on the basis of customer buying patterns.
Answer: B
Question: 2
In MPLS networks, what is the benefit of disabling TTL propagation?
A. To provide a visible extension of MPLS TTL functionality in a non-MPLS-enabled domain
B. To improve the IGP convergence time
C. To hide visibility to the core (provider) routers in the MPLS network
D. To provide a visible extension of IP TTL functionality in an MPLS-enabled domain
Answer: C
Question: 3
HSRP, known as Hot Standby Router Protocol, is a Cisco proprietary redundancy protocol. As an experienced network administrator, you are required to configure HSRP on a Pass4sure network.
Which TWO of the following will be available and shared between the routers configured with HSRP? (Choose two.)
A. a shared single interface
B. the ability to track serial interfaces
C. UDP-based hello packets
D. the impact of flapping links if timers are too low
Answer: B,D 
Question: 4
You have just configured HSRP group 10 in your network. Which MAC address will your default gateway use?
A. 0000.5E00.010a
B. 0000.0c07.ac0a
C. 0000.0c07.0110
D. 000.0cac.070a
Answer: B
Question: 5
As there are several logging modes, which mode will a Pass4sure router use when it stores log messages in Random Access Memory?
A. syslog logging
B. console logging
C. buffered logging
D. terminal logging
Answer: C
Question: 6
On a Cisco Catalyst 4500 Series, the fail LED is lit for one if its two power supplies. Which command would you use to check on this problem?
A. Show module
B. Show errdisable detect
C. Show environment
D. Show diagnostic content
Answer: C
Question: 7
Which description is making sense on the basis of the given information?
A. BGP NSF awareness is enabled
B. 10.11.1.187 is configured as an NSF-capable BGP neighbor
C. BGP graceful restart awareness is enabled
D. SSO for BGP NSF capability is enabled
Answer: A
Question: 8
When HSRP is configured on a network, which two of these items are provided, which are shared between the routers that run HSRP? (Choose two.)
A. Shared single interface
B. IP Address
C. TCP-based hello packets
D. MAC address
Answer: B,D
Question: 9
As an experienced technician, you are responsible for Technical Support in your company. One of the trainees is asking you how to implement RIP routing contexts in MPLS VPN. How to respond?
A. Routing contexts are implemented in a single routing process.
B. Routing contexts are implemented using multiple routing processes.
C. Routing contexts are implemented as a single instance of several routing processes.
D. Routing contexts are implemented as several instances of a single routing process.
Answer: D
Question: 10
When EIGRP is used as the PE-CE routing protocol which of these statements is correct?
A. EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS
B. Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured
C. Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links
D. Configure of the VPN is only required on the PE router
Answer: D
Question: 11
As an experienced Network Engineer, you are required to implement the security architecture assessment. Which of the following statement describes the most important reason for that?
A. Create a design specification document.
B. Integrate routing and switching components.
C. Document power and UPS availability
D. Document the customer's current and future technology projects.
Answer: B
Question: 12
What is the function of the no switchport catalyst switch interface configuration command?
A. Disables the interfaces to prevent traffic flow
B. Clears all the configurations on the interface
C. Switches the port from access mode to trunk mode
D. Converts the port from physical Layer 2 port to physical Layer 3 port
Answer: D

Quality and Value for the 642-067 Exam

Dump4certs Practice Exams for Cisco 642-067 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 642-067 Exam

If you prepare for the exam using our Dump4certs testing engine, we guarantee your success in the first attempt. If you do not pass the Access Routing and LAN Switching 642-067 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

Cisco 642-067 Downloadable, Printable Exams (in PDF format)

Our Exam 642-067 Preparation Material provides you everything you will need to take your 642-067 Exam. The 642-067 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

642-067 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Cisco 642-067 Exam will provide you with free 642-067 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 642-067 Exam:100% Guarantee to Pass Your Access Routing and LAN Switching exam and get your Access Routing and LAN Switching Certification.

http://www.Dump4certs.com The safer.easier way to get Access Routing and LAN Switching Certification.